Durite Volt Sensitive Battery Isolator (Battery Guard) 12/24 volt 40 amp0-852-04

Volt Sensitive Battery Isolator (Battery Guard). With provision for external On/Off switch.<br> 12/24 volt 40 amp<br> Solid State Battery Guard.<br> Protected to IP65.<br> Length 76mm x width 78mm x height 33mm.<br> ECE and CE approved.<br> Monitors the battery voltage and disconnect load when the battery voltage reaches a pre-determined level.<br> The voltage level at which this device operates to disconnect or re-connect the load to the battery can be set to one of 10 different programmes by the installer using a simple bridge and integral LED indicator.<br> The unit also has an alarm circuit to power an audio and/or visual indicator to warn of imminent disconnect, allowing the operator 50 seconds to rectify the situation before disconnecting.<br> A 10 second delay is built in prior to an alarm,to prevent spurious warnings.<br> The alarm circuit is limited to 500mA maximum. If a higher current is required, a relay with a diode must be used.<br> Quiescent current is below 10mA for all versions.<br> Appropriate terminals and insulating covers are provided with each unit.<br> <br> Pre-programmed voltage settings:<br> 12 volt: 24 volt:<br> Disc/Connect: Disc/Connect:<br> 10.5v 12.0v 21.0v 24.0v<br> 10.0v 11.5v 20.0v 23.0v<br> 9.5v 11.5v 19.0v 23.0v<br> 11.0v 13.5v 22.5v 26.5v<br> 11.5v 13.5v 23.0v 27.5v<br> 10.5v 12.5v 21.0v 25.0v<br> 11.5v 12.5v 23.0v 25.5v<br> 11.0v 12.5v 23.5v 25.5v<br> 12.0v 13.0v 24.0v 26.0v<br> 10.0v 13.0v 20.0v 26.5v<br>