3.0mm 44/0.30mm Thin Wall Cable.
Nominal Current Rating: 33.0 amps
Maximum overall diameter of cable: 3.4mm.
High temperature thin wall low voltage wiring cables suitable for use in the automotive, marine and allied industries. These cables are specified as standard by manufacturers throughout Europe, due to their high performance characteristics.
Manufactured in accordance with ISO6722 : 2006 (Class B)
Suitable for 12v and 24v systems (Maximum voltage 60v) - excluding High Tension Circuits
Plain Copper Conductors - PVC Insulated
Suitable for use at temperatures from from -40°C to +105°C with excursions up to +120°C
Reduced insulation gives considerable savings in weight and volume especially when used in large wiring harnesses
Good resistance to petrol, diesel, lubricating oils and diluted acids
Good resistance to moisture
Hard grade PVC insulation offers good resistance to abrasion and cut through
Typical (12V) wire gauge sizes per automotive applications | |
(NOTE | AWG gauges listed here represent minimum size — you can go heavier, but never go lighter. Example specs here do not represent all circuits currently found on production vehicles.) |
A/C circuit 10 gauge | |
Alternator 8 gauge | |
Ammeter 10 gauge | |
Cigarette lighter/accessory port 14 gauge | |
Clock 18 gauge | |
Coil wire 16 gauge | |
Dome light 16 gauge | |
Auxiliary driving lights 14 gauge | |
Gauges 14 gauge | |
Headlights 14 gauge | |
Headlight switch to fuse block 12 or 10 gauge | |
Heater leads 16 gauge | |
Heater switch 10 gauge | |
Horn 14 gauge feed and 16 gauge ground | |
Horn to relay 14 gauge | |
Ignition switch 12 or 10 gauge | |
Parking lights 16 gauge | |
Radio/CD to fuse block 14 gauge | |
Starter to relay 12 gauge (to solenoid) | |
Stop lights 16 gauge | |
Tail lights 16 gauge | |
Turn signals 16 gauge | |
Windshield wiper/washer 14 gauge |